Concrete Graphics - Application and Removal


	The World's Most Durable Concrete and Asphalt Marker Designed for Long-Term Use Outdoors and Indoors. The best way to get a message in front of people... literally.

101 USES FOR CONCRETE GRAPHICS^® :

Application & Removal

Application

Removal

Maintenance

• Can be applied to concrete, asphalt, blacktop, brick, tile, marble and vinyl
• No special preparation, over laminate or professional installation required

Easy To Install:


Sweep dry surface clean of dirt & debris Recommended surface temperate should be 32 degrees Fahrenheit or higher Peel off the backing paper (release liner) from the pressure sensitive adhesive Lay down flat on the selected location Smooth by hand from the center to the outer edge, be sure all edges lay flat Firmly press down, step on or use any type of roller to compress to the surface Concrete Graphics^® is not intended to be submerged in swimming pools, saunas, etc… as extended exposure to chemicals such as chlorine will affect graphics.

Easy To Clean

1. Wet the graphic and sweep with broom
2. Concrete Graphics^® can withstand limited power washing as well – avoid intense power washing as this can cause edges to come loose

Routine Maintenance:

1. Wet the graphic and sweep with a broom; avoid harsh cleaning chemicals to extend the product life
2. Concrete Graphics^® can withstand limited power washing, intense power washing can cause the edges to come loose from the surface

Easy To remove

1. Use a blade or key to get under an edge
2. Peel off at an angle of less than 45 degrees for best result - leaves no residue